Sliding Table Saws

Wood squaring machine with circular saw Ø 254 mm, blade tiltable from 0° to 45°, powered by a 2200 W single-phase motor

(Cod: DMSC2)

Wood squaring machine with tilting circular blade Ø 254 mm, 1600 mm stroke squaring carriage with blade-edge aluminum carriage, powered by a 2200 W single-phase motor.

(Cod: DMSC3)

Squaring machine equipped with circular saw Ø 315 mm with engraver Ø 90 mm.

(Cod: DMSC4-16)

Sliding Table Saw with spindle moulder integrated, two separate motors 3 Hp, a circular saw Ø 315 mm with engraver, carriage size of 700 x 530 mm

(Cod: DMCI300)

Woodworking table saw machine with integrated spindle moulder, equipped with 250 mm diameter circular saw, 1600 mm aluminium wagon length, spindle moulder capable of variable speed from 1800 to 9000 rpm powered by a 2.2 kW single-phase motor

(Cod: DMTSO250)

Table saw with saw unit with blade tilt 90°–45°, cutting height max. 4” (102 mm), circular saw Ø 315 mm, sliding carriage stroke of 1700 mm, powered by two single phase motor with a power of 2200 W

(Cod: DMCI301)

Squaring machine composed of squaring carriage and 2600 mm long aluminum wagon with stroke up to 2700 mm. It has a circular saw Ø 315 mm, adjustable in height and tilting up to 45° equipped with an engraver. It is powered by a 2200 W single-phase motor

(Cod: DMSC4-26)

Squaring machine consisting of squaring carriage and 2000 mm long aluminium wagon with a stroke of up to 2300 mm, Circular saw Ø 315 mm allowing a maximum cut in length of 2300 mm, Scorer, squaring carriage on flush-blade wagon, Vertical milling machine/spindle moulder with three speeds; powered by 2 independent 2200 W motors. Mounts SKF type bearings

(Cod: DMCI3012)

Squaring machine composed of squaring carriage and 3200 mm. It has a circular saw Ø 315 mm, adjustable in height and tilting up to 45° equipped with an engraver. It is powered by a 2200 W single-phase motor

(Cod: DMSC4-32)

Squaring machine for wood with squaring carriage on 2600 mm long aluminium wagon allowing a stroke up to a maximum of 2700 mm. Equipped with a circular saw Ø 315 mm adjustable in height and inclinable up to 45°, Scoring unit, Squaring carriage on 2600 mm flush-blade wagon,Vertical milling machine/spindle moulder with three speeds; powered by 2 independent 2200 W motors. Mounted on SKF type bearings

(Cod: DMCI3017)

Table saw for wood with carriage 2600 mm, tilt circular saw 315 mm with engraver and independent spindle moulder

(Cod: DMCI3013)

Professional squaring machine for wood powered by 2 independent motors capable of squaring 2800 mm in a single pass, equipped with blade wire wagon 2600 mm long, 315 mm diameter tilting blade, engraver, and spindle moulder tilting from 0 to 45 degrees, with 30 mm cutter shaft.

(Cod: DMCITS26P)

Squaring machine with 3200 mm wire saw wagon running on steel balls, circular blade with 315 mm diameter inclinable from 0 ° to 45 ° equipped with the newest integral protection with telescopic arm to connect one of our suction pads, two independent three-phase motors (one for the saw and one for the engraver)

(Cod: DMCI3014)

Squaring machine for wood and plastic materials with 3200 mm long carriage, tilting circular blade with 400 mm diameter at 3 speeds, engraver, motorized blade lifting and inclination, guides for squaring and parallel cutting with high precision digital readers

(Cod: DMCI305)